Published: 2026-08-20
What Is Sawdust Charcoal?
How clean sawdust is screened, dried, pressed with natural lignin, and carbonized into uniform BBQ charcoal.
5 min

Overview
The company describes sawdust charcoal as a BBQ fuel made from natural hardwood sawdust collected from woodworking villages and fruit-tree wood sources. The sawdust is formed into uniform pieces and carbonized in a kiln. The source lists the UAE, Japan, Greece, and Turkey among the markets where this type of charcoal is used.
Natural lignin in wood helps bind the pressed sawdust. Heat and pressure soften the lignin; as the briquette cools, the lignin hardens and helps hold the material together. The source says this process can be done without chemical adhesive when the sawdust is suitable.
The production sequence described on the source page is: select clean sawdust; screen out dust and foreign material; dry it; press it into the chosen shape; carbonize for 5–7 days at 700–800°C in low oxygen; cool naturally for about two days; then inspect and pack the finished charcoal.
The source product page lists square or hexagonal pieces, 3.8 cm in diameter and 10–27 cm long. Its published figures are 7,000–7,800 kcal/kg, moisture below 10%, fixed carbon 85–88%, ash below 3%, and a 6–8 hour burn time. These are source-listed values; confirm the specification for the order and production lot.
Key takeaways
- Natural sawdust is pressed into uniform pieces
- The source describes lignin bonding without chemical adhesive
- Confirm the product specification for each order
